American Dynamics MegaPower 3200 Guide d'installation Page 23
- Page / 86
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
21 of 82
Note: When you click the Write Configuration
To Selected MPCPUs and/or Files button, each
IP address is checked to ensure it has a properly
formatted IP address. If either IP address has an
invalid IP address format, you will receive a
warning message. You will need to correct the
invalid format before continuing.
Figure 48. Invalid IP Address message box
14. Choose one of the following:
• If you want to enable user logins, go section
Adding a User Login below.
• If you do not want to enable user logins, your
system is ready to use.
Adding a User Login
When you create a user login, the CPU login request
function is enabled. Users must log in to be able to
read and write configuration data.
To create a user login:
1. With EASY CPU started and a configuration file
open, click Edit in the dropdown menu bar.
2. Click User Logins…. The EASY CPU – Login
Manager dialog box appears.
Figure 49. Login Manager dialog
3. Click New User…. The Login Properties dialog
box appears (
Figure 50).
Figure 50. Login Properties dialog
4. Complete the Login ID, Password, and Confirm
fields in the Login Properties dialog box for the
new user.
5. In the Access Level field, click on the scroll
buttons to choose the appropriate access level for
the new user (1 being the lowest level, 9 being the
highest level).
Note: The Access Level field is grayed out for the
first user so that user will have all administrator
privileges. This field is available to set access
levels for subsequent users.
CAUTION: Be sure that at least one user has an
access level of 9. Failure to maintain such a user
might lock users out of the system and require a
system reinstallation.
6. Click OK to save the new user properties or
Cancel to close the dialog box without saving the
properties.
7. Repeat this process for all users for whom logins
are desired.
Note: You also can modify or delete users in the
Login Properties dialog box whenever buttons are
not grayed out.
8. Be sure to save these changes and write the
modified configuration file to the CPU.
Note: With the user login function enabled, all newly
initiated program sessions will require users to log in
before reading or writing configuration data.
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Produits connexes et manuels pour Processeurs American Dynamics MegaPower 3200
(38 pages)Hitachi CP-SX5600 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Projektoren Hitachi CP-SX5600.
Wir stellen 1 PDF-Handbücher Hitachi CP-SX5600 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commentaires sur ces manuels