American Dynamics DV16000 Spécifications télécharger pdf (Page 55)

Configuring the Intellex

Installation and Configuration Guide 45

• Latch Messages—to require the operator to clear alarm messages manually from screen

using Utility > Clear Latched

• Alarm on Video Loss—to generate an alarm when the unit stops receiving video signal from

any camera

• Alarm Message Display—to display the ALARM message on the camera’s image when an

alarm occurs

• Unit Alarm Out—to energize alarm output 16 when any alarm event occurs

• Message Alert—to energize alarm output 16 when the unit is in linear mode and a notification

screen appears or unit is background archiving and a notification screen appears

Note

15 Minute Index—to play back the video 15 minutes before an actual alarm. To use 15 Minute

Index, the camera must be actively recording and not in alarmed recording mode.

3 Select Quality:

4 Select the sensitivity and resolution. Higher sensitivity and resolution offer better quality but

less recording time.

5 From the Alarm In Names tab, name each physical alarm input. Use these names when

reviewing alarm images and searching the alarm database.

6 From the Alarm In Polarity tab, select the alarm polarity, the signal that triggers an alarm input.

7 From the Alarm in Duration tab, select Single Frame or Normal Duration. Single Frame

instructs the Intellex to mark a single frame for an alarm event for that alarm input with the

Super highest image quality

Normal mid-range quality

Extended Record highest compression

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 97 98

Pas de commentaire

American Dynamics DV16000 Spécifications Page 55