American Dynamics ADCC1100 Spécifications télécharger pdf (Page 31)

Matrix Installation and Operation

Programming Tours

The Tour Set Up screen can be used to program up to 16 tours, which can be recalled on

any monitor. Each tour can consist of up to 16 steps, each step being either a fixed

camera position or a programmed view from a PTZ or dome camera. It is also possible to

specify the period of time (or dwell time) each step is displayed for.

To program a tour, follow the steps below:

1. In the View menu, select the Tour Set Up option.

2. In the Tour Set Up screen, move to the Tour number item.

3. Enter a Tour Number using the numeric keys. Valid tour numbers are 1 to 16.

If a tour has already been allocated with this tour number, the details of the tour are

displayed and can be amended at this point.

4. Use up/down joystick commands to move to the step ID that is to be edited (numbered

1 to 16).

5. Once the step ID is selected, the details can be changed. First, press the FUNCTION

(

) key to select the type of input to be used; either a fixed camera (C) or a

programmed view position (V). Once the correct letter is displayed, use the numeric

keys to enter the ID number of the required fixed camera or view position.

6. Use either the right joystick command or the ENTER key to move to the dwell time

parameter for the selected step.

7. Using the numeric keys, enter the dwell time (in seconds) for this step of the tour.

8. Use the down joystick command or the ENTER key to move to the next step in the

tour.

9. Repeat steps 4 to 8 to edit all the steps in the tour.

10.Once all steps in the tour have been programmed, select another tour by returning

to the Tour Number field or leave the screen by selecting the Return menu item.

NOTE

A view or camera number of 000 can be entered in any position of the tour. This is used to

mark the end of the tour. When the tour is running and this position is reached, the tour

will return to the start.

4.2 Tour Set Up

Tour number 01

ID:CAM:DWL ID:CAM:DWL

01:C01:02 09:C09:02

02:V01:02 10:C10:02

03:C03:02 11:C10:02

04:C04:02 12:V02:02

05:C05:02 13:C13:02

06:C06:02 14:C14:02

07:V128:02 15:C15:02

08:V096:02 16:V025:02

Return

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Pas de commentaire

American Dynamics ADCC1100 Spécifications Page 31