American Dynamics ADCC1100 Spécifications télécharger pdf (Page 43)

Matrix Installation and Operation

RS232

• The RS232 Baud Rate can be defined as 1200, 2400, 4800, 9600, 14400, 19200

and 38400. Optimum performance can be achieved by setting the baud rate to 9600

and therefore this is the default setting.

• The Data Bit is configurable to 5, 6, 7 or 8. The default setting is 8.

• The Parity default is NONE, but can also be configured to ODD or EVEN.

• The Stop bit is configurable between 1, 1.5 and 2. The default setting is 1.

RS232 defaults: 9600, 8 data bits, 1 stop bit, parity = none.

Assigning Keyboard Priorities

Using the Keyboard Priority screen, it is possible to assign each keyboard a priority

level. This feature is useful, for example, if two keyboards try to take control of a camera

at the same time. In this instance, the keyboard with the highest priority would gain control.

To assign keyboard priority, follow the steps below:

1. In the Installer menu, select the Keyboard Priority option.

2. In the Keyboard Priority screen, move to the desired priority level. P1 is the highest

priority and P8 is the lowest.

3. Using the right joystick command, select the Keyboard ID number/letter to which this

priority level is to be assigned. RS485 keyboards ID numbers range from 1 to 8,

while RS232 keyboards have an address range a to d. It is also possible to leave a

priority level unassigned by selecting the UNASSIGNED option.

4. Repeat steps 2 and 3 to make further alterations.

5. Once amendments on this screen are complete, select the Return to Menu option.

NOTE

• Default priorites are: P1:1, P2:2, P3:3, etc. P8:8. RS232 keyboards have no priority

until manually assigned within the menu.

6.2 Keyboard Priority

P1:1

P2:a

P3:2

P4:b

P5:3

P6:c

P7:4

P8:d

Return to Menu

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Pas de commentaire

American Dynamics ADCC1100 Spécifications Page 43