American Dynamics ADCC1100 Spécifications télécharger pdf (Page 40)

MegaPower LT

Mapping Responses to Events

An event is a message that can be sent from an MPLT either as a broadcast message or

an alarm. A response to the event can be activated by any MPLT on the RS485 network.

Once responses have been created, they can also be mapped to events. This means that

when an event is received from another matrix, a response to that event will be triggered.

This is achieved using the Event Response screen:

To assign a response to an event, follow the steps below:

1. In the Alarm menu, select the Event Response option.

2. In the Event Responses screen, use the numeric keys to enter the number of the

event that is to be mapped to a response and press the ENTER key to jump to it. The

up/down joystick commands can also be used to move through the events.

3. Use the numeric keys to enter the desired Response Number (1 to 32) for that event.

Enter 0 if no response is to be triggered.

4. Repeat steps 2 and 3 to specify further mappings.

5. When programming has been completed, select the Return to Alarm Menu option

to return to the previous menu.

5.3 Event Responses

Event:Response 01:005

02:005

03:006

04:007

05:008

06:009

07:010

08:011

Return to Alarm Menu

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 83 84

Pas de commentaire

American Dynamics ADCC1100 Spécifications Page 40